File readme_notes_re_ML_incr_update_2017_0804.txt Sam Perkins, KDA-DWR August 4, 2017 Files required for scenarios with 15 and 30 percent pumping reduction within revised Zone A (10 pct or greater response) The original model backup for reduced pumping scenarios was updated to include the required files for 15 and 30 pct pumping reductions within revised zone A (10 pct or greater response). The updated backup file GMD5_ML_2017_08.zip supersedes backup file GMD5_ML_2017.zip. An incremental backup of the additional files needed to run the 15 and 30 pct pumping reductions is also provided as file build_GMD5_ML_incr_update_2017_08.zip. Its contents, folder build_GMD5_ML_incr_update, contains backup files that can be copied to the original backup under folder ML\BLA as follows: ML\BLA: Python postprocessor files *.py for 15 and 30 pct pumping reduction cases; ML\BLA\bat: batch file to run 15 and 30 pct pumping reduction scenarios, including preprocessor, Modflow and postprocessor. ML\BLA\pre: preprocessor files, including revised depletion response zone file RSC_Zenith_RspZones_rev.csv ML\BLA\nam: Modflow name files and associated *.in files used in running Modflow; The following output files are provided: ML\BLA\in: Model input *.WEL and *.MNW files for reduced pumping scenarios, written by preprocessor; ML\BLA\out: global budget *.csv output files written by Balleau version of Modflow; SFR package hydrograph *.txt output files written by versions of Balleau postprocessor. By either downloading and unzipping the updated backup file GMD5_ML_2017_08.zip or using the contents of the incremental backup file build_GMD5_ML_incr_update_2017_08.zip to update the original backup, the batch file run_10pct_rspZone_rev_15_30pct_reduction.bat should run from ML\BL_A as follows: bat\run_10pct_rspZone_rev_15_30pct_reduction